Original price was: $15.95.$11.17Current price is: $11.17.
- Buy with Peace of Mind
- The home of quality products.
- Experience the Best Quality
- Your satisfaction is 100% guaranteed.
The FIXE Traditional Anchor is designed for any type of route. When placed in good rock, the anchor simultaneously loads both bolt placements. The design locates the anchor bolts in a vertical orientation. This will eliminate the “Shock Load” possibility if one anchor bolt were to fail. This design is far superior to anchors that locate the anchor bolts across a horizontal plane.
Fixe does not recommend outdoor use of this anchor. If you choose to use plated steel outdoors, use only in arid and low-corrosive environments.
WARNING for California customers: Cancer and reproductive harm. For more info please visit www.p65warnings.ca.gov
- Rounded inner edge for less wear on carabiners
- Optimized surface area contact with the rock
- Made in Barcelona, Spain
- Geometry: When placed on a roof, the carabiner will be routed so that it never comes into contact with the projecting head of the bolt anchor.
- Conical Washer: The rim of the bolt anchor hole protrudes slightly into a conical shape, away from the wall. The act of pulling the bolt anchor will generate a spring effect that provides constant pressure against the wall, multiplying the strength of the torque. It also provides more consistency when torque tightening the bolt.
- Anti-rotation Pins: Textures on the hanger help to reduce the likelihood of the hanger spinning.
- Ecotri zinc plated steel (Replacing bichromate steel): Perfect for equipping indoor sport facilities such as gyms and climbing walls. Its manufacturing process is characterized by low emission of residues and increasing its resistance to corrosion. 8 microns of zinc coating (free of chromium-6) is applied and finished with an organic seal. With three treatments a higher resistance to corrosion is achieved (96h white corrosion + 360h red corrosion) and the resistance to thermal shock (200ºC) is also incorporated.
- Lighter: With a thickness of 3.5mm (previously 4mm) Fixe has reduced the weight of the hanger by 12.5% while still being one of the most robust hangers on the market.
- Fixe does not recommend for outdoor use: If you choose to use plated steel outdoors, use only in arid and low corrosive environments.
| Brand: | Fixe Hardware |
|---|---|
| Mfg Sku/Part Number: | TAPS-1/2 |
| Rating: | 4950 lbs / 22kn CE/UIAA Certified |
| Material: | Ecotri zinc plated steel3.5mm Stock (hanger)10mm Stock (ring) |
| Dimensions: | 1/2-inch / 12.8mm bolt hole |
Be the first to review “Fixe Hardware PS 1/2 Traditional Anchor”
Related products
Belay & Rappel Devices
Belay & Rappel Devices
Passive Pro - Nuts
Protection & Hardware
Ice & Snow Protection
Protection & Hardware
Protection & Hardware
Reviews
There are no reviews yet.